Vision Lites - Stock & Custom
Karpen Steel provides a Low Profile Metal Vision Lite Kit for ¼" glazing from National Guard Products, Inc. as its standard Vision Lite. Specialty vision lite kits are available as detailed below. Note: all glass and glazing by others. Vision Lites for odd sizes and thick glass are available, as well as flush kits.
- Thick Glass Kits.
- Round Vision Lite Kits.
- Torx Security Screws.
- Galvannealed Kits.
- Muntin Bars
- False Muntin Bars.
- True Divided Lites.
Vision Lites -Custom
Low profile vision lite kit. One side is welded to the door and the other side is removable. Can accommodate various thicknesses of glazing.
Thick Glass Kit. One side is flush with the skin of the door. The other side is a removable kit, with a low profile design.
Flush kit both sides. This design utilizes tube molding on the removable side to make it flush with the skin of the door. Can be used with various glazing thicknesses, up to
1 ¾" thick doors.
Flush molding kit one side/low profile kit opposite side. Kit is flush with the skin of the door on one side. The other side is a removable kit, with a low profile design.
Flush molding kit for 1⁄2" or 5⁄8 " thick glazing. Kit utilizes removable kit with 5⁄8" x 5⁄8" tubing and flush design on the opposite side.
Lead Lined Doors with VL Kits. This style of kit ensures that the door will have lead to overlap the lead found in the leaded glass.
Muntin Bars. Muntin bars allow for true divided lites in frames and doors. Available for ¼" glass only.
Muntin Bar Vision Lite Assembly. Muntin bars allow for true divided lites inside vision lite assemblies, therefore using smaller individual pieces of glass. Available for ¼" glass only.
False Muntins Similar Design as Shown Above. False muntins are used to allow one piece of glass to be used in the vision lite kit. Specify required glazing thickness at time of order.