skip to main content

Karpen Steel Custom Doors and Frames

Phone (828) 645-4821
Fax (800) 851-2131
Find us on Facebook See our work on Pinterest Follow us on LinkedIn

Doors

Dutch Doors & Dutch Door Shelves

Dutch Door

Dutch doors are doors that are split in two, top and bottom, so that the top may swing independently of the bottom. The two leaves may be joined by a bolt (surface or flush). Typically the bottom leaf of the dutch door latches into the frame.

Dutch Door Shelves

There is often a shelf between the two leafs of the dutch door, usually used to staff a counter at the shelf with the top open (such as a stock room, or a ticket counter). These shelves can be made in stainless steel as well as standard cold-rolled steel.

Custom sizes of the shelves are available.

Dutch doors can be made in various materials or thicknesses. Therefore, they can be 1 ¾" thick, 1 38 " thick or 2" thick for example. In addition, they can be made in 18, 16, 14, or 12 gauge, and can have either a polystyrene or vertically steel stiffened core. Some dutch doors have vision lites in the top half or louvers in the bottom half.  Doors can be made with UL Label. 

3 Hour Label Dutch Door Details:

  • 4'-0" x 7'-2" Maximum Single Door Opening.
  • Vertically Steel Stiffened - 16 or 14 Gauge.
  • Top and bottom leaves must latch into strike jamb of frame.
  • Astragal provided between leaves.  Drawing showing astragal: cudm0087.pdf
  • Single shelf optional, on push side of door.

"A Closer Look At Dutch Doors"
Article as appeared in the December 2010 issue of Doors and Hardware Magazine. Sarah Henken & Rachel S. Smith, President of Karpen Steel, are the co-authors of the article.

Back to Top
181 Reems Creek Rd., Weaverville, NC 28787
(828) 645-4821 • (800) 851-2131 fax
(828) 645-3230 fax outside USA
karpensteel@karpensteel.com
Karpen Steel Custom Doors and Frames
All material © Karpen Steel 2014